Metal Clay Supply House - Your one stop shop for all your metal clay supplies need.

You are here: Home > Pastes > Other

Sort By:

Page of 1

Essential Oil Lavender 2.5ml

Our Price: $11.00

Add this to your metal clay paste to create an oil paste. Refer to PMC Guild's Fusion newsletter on all the benefits of using oil paste for strength when attaching components or doing repairs. Recommendations are to add 25-35 drops to a full container of PMC3 paste (15 grams), when using tincture of oil (4 parts oil and 6 parts alcohol) . Or add 10-15 drops of the essential oil straight to the PMC3 paste. You can also add this to Art Clay paste and make your own homemade version. Allow the paste to absorb over an 8 hour period of time before using. You can add water if the paste dries out. This oil paste should be a bit more creamy than regular paste, in it's consistency. This oil is also good for burns, so keep it's good to put into your first aid kit.

Stores do sell larger bottles, for about $12, but it is likely you'll never use it all. This is a nice size to have without worrying about it going bad before you can use it all. Expiration date on this batch is Nov, 2011. Keep stored in cool dark place. Comes packaged in a black baggy for storage and longer life. The bottle does not have a dropper, but we sell them, TL387, under Painting, Glazing and Surface Coloration.

Oil Paste - 10g

Our Price: $39.22

Silver Oil Paste 10g jar. Can be used to repair or combine previously fired pieces.Thinning liquid included. Requires piece(s) to be re-fired at 1472 degrees F. , although a butane torch may be used when joining fine silver bezel wire seams.

Overlay Paste - 15g

Our Price: $46.38

Art Clay Silver 650/1200 Overlay Silver Paste (OSP) is "low-fire" silver clay in paste form, formulated specifically to use on glazed porcelain. Overlay Silver Paste is in a viscous, liquid form and water soluble, so that you can express 3 dimensional drawings on a surface of porcelain, ceramic or glass. After firing at appropriate temperature ranging from 650ºC/1200ºF to 800ºC/1472ºF, it will turn into 99.9% silver. During firing, the pure silver powder solidifies. The binding agent consists of carbon, hydrogen and oxygen resulting in the release of harmless carbon dioxide and steam during firing. [Instructions] Some silver settling may occur at bottom of the jar. Stir the paste well with a brush or metal spatula before use. This product is water-based and can dry. Always keep the container tightly capped. If it dries, add a small amount of water to re-hydrate. To dilute the paste, take out the necessary amount and place it in a separate container. Then, add water a drop at a time. Do not dilute it directly in the bottle. It is important that your kiln’s pyrometer is functioning properly. Always be sure to ventilate the workroom when using a kiln.