Home > Syringes >   10gm Three Tip Syringe Small,Med,Large
	Our Price: $40.54 Availability: Usually Ships in 24 to 48 Hours Product Code: A-076 Qty:

Description   Art Clay Silver 650/1200 Syringe consists of pure silver particles, a binding agent, and water. The binding agent is produced from harmless pulp fiber. During firing, the pure silver particles solidify. The binding agent consists of carbon, hydrogen, and oxygen resulting in the release of harmless carbon dioxide and steam during firing. This product is low-fire clay that can be fired at 650ºC/1200ºF and is pure silver (99.9%) after firing. The special formula of this product allows for combination with glass, porcelain and ceramic materials, and also suitable for firing with sterling silver findings or wires (SV925 and higher quality recommended with a firing temperature of 650ºC/1200ºF, with a recommended holding time of 30 minutes). Do not fire a soldered piece with 650/1200 Syringe as the soldering temperature is lower than the firing temperature. [Instructions] This product is water-based and can dry up. Always keep the syringe tightly capped. By using syringe type clay, you can draw designs directly onto pieces (clay type or paste type) and create subtle patterns which were formerly difficult to produce with conventional materials. The piece should only be fired after it is completely dry. Attach the nozzle firmly onto the tip of the syringe; otherwise, the nozzle may come off when extruding clay. The tip of the nozzle is delicate, do not bend, squeeze, or press it against a hard surface. After use replace the protective cap. Wrap the nozzle with a wet tissue or gauze to avoid drying. After use, remember to completely clean out any remaining clay from the nozzle (Recommendation: use an empty syringe filled with water). Some kilns display a different temperature from the actual inside temperature. It is known that silver will melt at 961ºC/1763ºF. It is recommended that your kiln firing temperature does not exceed 900ºC/1652ºF. You may combine 650/1200 Syringe with the original silver clay series (clay, paste and syringe types), but the firing condition should be the same as the original clay series. You may combine 650/1200 Syringe with other 650/1200 series products (i.e. clay, paste and syringe types). Do not bend any fired piece with unreasonable pressure. Keep the clay indoors, out of direct sunlight, and do not store in a refrigerator. For best results use clay as soon as possible after opening the package.   Related Products... PMC+ Syringe 9g Syringe Keeper PMC3 Syringe 9g Syringe attachment Our Price: $20.47 Add Our Price: $1.00 Add Our Price: $20.37 Add Our Price: $10.00 Add 10gm Syringe Refill No Tip 10gm One Tip Syringe Med-Green Our Price: $29.30 Add Our Price: $32.86 Add

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Syringes

	Air-tight Clay Storage - 1oz. $4.86
	10gm Syringe Refill No Tip $29.30
	Art Clay Silver Paste - 20g $44.18
	1x 12" Pure Silver Round - 18gg $8.00
	Coal-based, acid-washed carbon 4-lb. bag $13.32
	Art Clay Silver Slow Dry - 10g $24.96
	COPPRclay - 100g $19.98
	Art Clay Silver 650 Low Fire - 10g $24.96
	Butane Torch - Refillable $39.00